Beschreibung
Are you planning to lower your vehicle? To do this, simply install the S-TECH spacer sleeves onto the forks piston rod. For example, if you want to reduce the forks travel by 35 mm, simply place the appropriate number of sleeves (in this case: 3 x 10 mm plus 1 x 5 mm) on the fork leg inside the cartridge tubethat is, between the pistons or the rebound spring (if present) and the cartridge head. This reduces the forks travel by the same amount as the stack of spacers. So if you install a total of 35 mm of spacers, the travel is shortened by 35 mm. This modification is simple, quick, and fully reversible!
Available sizes:
- 13 x 20 (inner x outer) -> e.g., for all forks with 12 or 12.5 mm piston rods
- 15 x 22 (inner x outer) -> e.g., for WP Open-Cartridge forks with 14 mm stanchions
- Both sizes are available in 5 mm and 10 mm thicknesses
| Item information | Value |
|---|---|
| Item weight: | 0,10 kg |
Product safety informationManufacturer information:S-TECH RACING
Am Entenpfuhl 22a
Rheinland-Pfalz
Göllheim, Deutschland, 67307
[email protected]
